Residential Carpet Cleaning Guide Chemspec and Prochem

FOR THE MOST COMPLETE CLEANING, ALWAYS FOLLOW THESE STEPS:
‒ Pre-inspect all areas to be cleaned and communicate with the customer
‒ Prespray areas to be cleaned
‒ Agitate prespray into surface (the use of an electrical agitation device such as the
Procaps Low-Moisture Cleaning Machine will increase the amount of suspended soil)
‒ Extract, neutralize and rinse all areas

LIGHT SOIL:

PRESPRAY:

Inline injection sprayer:
UltraPac TLC (S711 or S712)  pH 9.5-9.8 ‒ Mix 1.5 qt. (1.4 L) into the 5 qt. (4.7 L) container and fill with water.  

Electric Pump-up sprayer:                                                                                                              UltraPac TLC (S711 or S712)  pH 9.5-9.8 ‒ Mix 6 oz. (177 mL) per gal. (3.8 L) of water.

EXTRACTION: Truckmount:                                                                                                           All Fiber Deep Clean  pH 5.2-5.8 ‒ Mix 1 qt. (0.9 L) per 5 gal. (18.9 L) of water and extract.         

Portable Extractor:                                                                                                                           All Fiber Deep Clean pH 5.2-5.8 ‒ Mix 2 oz. (59 mL) per gal. (3.8 L) of water and extract.           

MEDIUM SOIL:

PRESPRAY: Add together the following:

Inline injection Sprayer: UltraPac TLC (S711 or S712)  pH 9.5-9.8 ‒ Mix 1.5 qt. (1.4 L) into the 5 qt. (4.7 L) container and fill with water.                                                                                                  Biosolv Booster Additive ‒ Add 6 oz. (177 mL) into container.

Electric or Pump-up sprayer:
UltraPac TLC (S711 or S712)  pH 9.5-9.8 ‒ Mix 6 oz. (177 mL) per gal. (3.8 L) of water.
Biosolv Booster Additive ‒ Mix 2 oz. (59 mL) per gal. (3.8 L) of water.                   

EXTRACTION: Truckmount:

All Fiber Deep Clean  pH 5.2-5.8 ‒ Mix 1 qt. (0.9 L) per 5 gal. (18.9 L) of water and extract.

Portable Extractor:

All Fiber Deep Clean  pH 5.2-5.8 ‒ Mix 2 oz. (59 mL) per gal. (3.8 L) of water and extract.

HEAVY SOIL:

PRESPRAY: Add together the following:

Inline injection Sprayer:
UltraPac TLC (S711 or S712)  pH 9.5-9.8 ‒ Mix 1.5 qt. (1.4 L) into the 5 qt. (4.7 L) container and fill with water.Biosolv Booster Additive ‒ Add 6 oz. (177 mL) into container.
Energizer ‒ Add 2 oz. (2 scoops) into container.

Electric or Pump-up sprayer:
UltraPac TLC (S711 or S712 pH9 .5-9.8 ‒ Mix 6 oz. (177 mL) per gal. (3.8 L) of water.
Biosolv Booster Additive ‒ Add 2 oz. (59 mL) per gal. (3.8 L) of water.
Energizer ‒ Add 1 oz. (1 scoop) into container.

EXTRACTION: Truckmount:
All Fiber Deep Clean  pH 5.2-5.8 ‒ Mix 1 qt. (0.9 L) per 5 gal. (18.9 L) of water and extract.

Portable Extractor:
All Fiber Deep Clean  pH 5.2-5.8 ‒ Mix 2 oz. (59 mL) per gal. (3.8 L) of water and extract.