Property Management / Apartments Cleaning Guide

FOR THE MOST COMPLETE CLEANING, ALWAYS FOLLOW THESE STEPS:
‒ Pre-inspect all areas to be cleaned and communicate with the customer
‒ Prespray areas to be cleaned
‒ Agitate prespray into surface (the use of an electrical agitation device such as the
Procaps Low-Moisture Cleaning Machine will increase the amount of suspended soil)
‒ Extract, neutralize and rinse all areas

HEAVY SOILS:

PRESPRAY: Add together the following:

Inline Injection Sprayer:                                                                                                             Heavy Artillery  pH 11.9-12.4 ‒ Use undiluted in 5 qt. (4.7 L) container.                                           Or Use                                                                                                                                         Fission ‒ Mix 1.5 qt. (1.4 L) into the 5 qt. (4.7 L) container.                                                                   Biosolv Booster Additive ‒ Add 2 oz. (59 mL) per gal. (3.8 L) of water.                                    Energizer ‒ Add 2 oz. (2 scoops) into container.

Electric or Pump-up Sprayer:
Heavy Artillery  pH 11.9-12.4 ‒ Mix 16 oz. (.47 L) per gal. (3.8 L) of water.
Or Use
Fission ‒ Mix 4 oz. (118 mL) per gal. (3.8 L) of water.
Biosolv Booster Additive ‒ Add 1 oz. (30 mL) per gal. (3.8 L) of water.
Energizer ‒ Add 1 oz. (1 scoop) into container.

EXTRACTION: Truckmount:
All Fiber Deep Clean  pH 5.2-5.8 ‒ Mix 1 qt. (0.9 L) per 5 gal. (18.9 L) of water and extract.

Portable Extractor:                                                                                                                           All Fiber Deep Clean  pH 5.2-5.8 ‒ Mix 2 oz. (59 mL) per gal. (3.8 L) of water and extract.