Phoenix D850 Desiccant Dehumidifier

The PowerDry D850 delivers 850 CFM of ultra-low grain process air and removes a stunning 370 pints per day at AHAM conditions. The true four-hole design* allows for positive, neutral, or negative pressurization of the affected area. Three-hole desiccants** inherently pull unaffected and/or outside air into the drying chamber. Power to the unit is provided by either a 30- or 50- amp, 230-volt grounded power cord (both are included). The reactivation air stream is ducted through 6” flex duct, which is also provided with the unit.

* Having completely separate process and regeneration airstreams.
** Where regeneration airstream is pulled from the process airstream.

When to use:

• D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods
• D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers
• D850 desiccant is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

  Part No.	4034000
  Power	208-240VAC, 50/60Hz, Single Phase 30A or 50A branch circuit protection
  Water   Removal	370 Pints/Day @ AHAM 92.5 Gal./Day @ Saturation
  Blower	850 CFM
  Operating   Range	-10°F to 120°F
  W x H x D	20″ x 41″ x 23.25″
  Weight	153 Lbs.