Foam-It Pump Up Sprayer - 5 Liter | 1.3 Gallon
In stock
SKU
Foam It Pump Up Sprayer - 5 Liter | 1.3 Gallon
5 Liter (1.3 Gallon)
• Compact unit with manual pump
• Maximum portability for small jobs and spot cleaning
• Comfortable grip handle with trigger for quick on/off
• Wand holder on tank for easy storage
• Air gauge and pressure relief valve for safety
• Viton seals for chemical compatibility
• Natural color tank for easy visibility of product levels
Features
Operation Instructions:
1. Ensure all air pressure is released from unit by pulling up on the red pressure relief valve.
2. Ensure the trigger handle (PUF5L-PSG) is not in locked position.
3. Securely hold the unit and unscrew the pump assembly (PUF5L-PA) from the tank in a counter-clockwise motion.
4. Follow all instructions from chemical manufacturer. Fill tank 3/4 of the way with pre-mixed solution. (Note: Do not overfill tank with solution.)
5. Securely hold the tank and screw the pump assembly back on in a clockwise motion.
6. Pressurize the tank by pumping approximately 15 to 20 times, or until air pressure gauge reads 25 psi (1.7 bar). (Note: The pressure relief valve will leak if the air pressure is too high. Do not overfill tank with air)
7. Once the desired pressure has been achieved, push the handle down and twist it clockwise to lock it in place.
8. To start foaming, point the wand assembly at the area you wish to foam and squeeze the trigger handle to discharge foam.
1. Ensure all air pressure is released from unit by pulling up on the red pressure relief valve.
2. Ensure the trigger handle (PUF5L-PSG) is not in locked position.
3. Securely hold the unit and unscrew the pump assembly (PUF5L-PA) from the tank in a counter-clockwise motion.
4. Follow all instructions from chemical manufacturer. Fill tank 3/4 of the way with pre-mixed solution. (Note: Do not overfill tank with solution.)
5. Securely hold the tank and screw the pump assembly back on in a clockwise motion.
6. Pressurize the tank by pumping approximately 15 to 20 times, or until air pressure gauge reads 25 psi (1.7 bar). (Note: The pressure relief valve will leak if the air pressure is too high. Do not overfill tank with air)
7. Once the desired pressure has been achieved, push the handle down and twist it clockwise to lock it in place.
8. To start foaming, point the wand assembly at the area you wish to foam and squeeze the trigger handle to discharge foam.
