VersaClean™ Overhaul
In stock
SKU
76-242
Overhaul
Low odor, superior degreasing alkaline formulation powers through the toughest dirt and grime.
For professional use only. Keep out of reach of children. Read directions and cautions before use.
DIRECTIONS: Mix 32 oz. (946 mL) of concentrate with enough water to make 1 gal. (3.8 L) of ready to use
(RTU) solution. Preinspection: Examine the surface for evidence of pre-existing damage and for stains and
soiling that will not be possible to remove. Check for and remove any coatings. These coatings will interfere
with proper cleaning. Work Process: 1) Post wet floor signs. Protect areas not being cleaned from overspray.
2) If the surface has extensive scale or rust staining, pretreat using Versaclean Facelift Concrete, Tile and Grout
Brightener. Follow the label directions for this product. 3) Use a pressure sprayer to apply RTU solution to the
surface. Use a coarse spray and do not generate aerosol. Allow a 5 - 10 minute dwell time but do not allow
solution to dry on the surface. 4) For floors use a rotary buffer with a nylon grit brush to agitate surface. For
countertops and vertical surfaces use a hand brush to agitate the surface. 5) Use high pressure water at as high
a temperature as possible to pressure wash the surface. Be sure to vacuum all waste water. Inspect surface
for standing water and remove. 6) Establish good drying conditions. CAUTION FOR APPLICATION: 1) Test
surfaces for compatibility before use. 2) Product is alkaline. Avoid contact with alkaline sensitive surfaces suchas aluminum.
For professional use only. Keep out of reach of children. Read directions and cautions before use.
DIRECTIONS: Mix 32 oz. (946 mL) of concentrate with enough water to make 1 gal. (3.8 L) of ready to use
(RTU) solution. Preinspection: Examine the surface for evidence of pre-existing damage and for stains and
soiling that will not be possible to remove. Check for and remove any coatings. These coatings will interfere
with proper cleaning. Work Process: 1) Post wet floor signs. Protect areas not being cleaned from overspray.
2) If the surface has extensive scale or rust staining, pretreat using Versaclean Facelift Concrete, Tile and Grout
Brightener. Follow the label directions for this product. 3) Use a pressure sprayer to apply RTU solution to the
surface. Use a coarse spray and do not generate aerosol. Allow a 5 - 10 minute dwell time but do not allow
solution to dry on the surface. 4) For floors use a rotary buffer with a nylon grit brush to agitate surface. For
countertops and vertical surfaces use a hand brush to agitate the surface. 5) Use high pressure water at as high
a temperature as possible to pressure wash the surface. Be sure to vacuum all waste water. Inspect surface
for standing water and remove. 6) Establish good drying conditions. CAUTION FOR APPLICATION: 1) Test
surfaces for compatibility before use. 2) Product is alkaline. Avoid contact with alkaline sensitive surfaces suchas aluminum.
Overhaul SDS (8-13-2015)
